Evolv Base Frame als Laufstall einrichten

Quick Answer

To set up the Evolv Base Frame as a playpen, remove the ceiling mesh from your Evolv crate and replace it with the Playpen Frame add-on. This creates an open-top, secure area for supervised play.

Step-by-Step Playpen Setup

1. Remove the Ceiling Mesh: Unzip the ceiling mesh from the top of your Evolv crate. Set the mesh aside; you will not need it for the playpen configuration. Make sure the zipper is fully detached to avoid snagging the frame.
2. Attach the Playpen Frame: Take the Evolv Base Frame add-on and align it with the top edges of the crate walls. Press down firmly until you hear a click, indicating the frame is locked in place. Check all four corners for a secure click; a loose corner can collapse during play.
3. Secure the Frame to the Crate: Use the included clips or fasteners (if provided) to attach the frame to the crate walls. This prevents accidental dislodging when your dog pushes against the sides. Double-check the fasteners after the first use, as they may need tightening.
4. Test Stability Before Use: Gently push on each side of the playpen frame to ensure it is firmly attached. Place a treat inside to encourage your dog to enter and observe the setup under supervision. If the frame wobbles, recheck the clips and alignment before letting your dog inside.

Product Facts

• Evolv Base Frame/Playpen Frame: Evolv is the first 2-in-1 Dog Crate and Playpen, offering a transformative experience with our Playpen Frame add-on. You can switch between crate and playpen modes without buying a separate enclosure, saving space and money.